do it yourself: tote bag
To make a tote bag like this, you'll need:
Now, cut it in the desired size and shape (mine gets a bit weird because the print is not in the middle of the t-shirt but i still wanted it in the classical shape). My tote is approximately 36cm wide (before sewing) and 46cm tall (before sewing).
Pin the two front layers together (in my case; the printed piece and one of the linen pieces), and then pin the two back layers together. Put them together with the outside in and the inside out (in my case; linen out, t-shirt fabric in). Pin them together. Start by sewing the right side and the left side (in my case; bot long sides), leave the top and the bottom of the tote open.
If you want to, you can cut along the outside of the seam to remove unneccessary fabric. Don't forget to turn your tote right side out regularly to make sure the seams look good (especially here before you cut so that you can rip your seam if anything looks wrong).
You want the top of your tote to be even since it's going to show (unless you want to put a zipper in). Fold the fabric twice so that both the upper and the lower edge looks good.
Finally, it's time to sew the bottom layers together. Make sure the seam is tight and strong in the corners so that your tote won't break.
When you're done with the last step, you can turn your bag right side out and check that everything looks good. This is what mine looks like right now.
Now, you'll need some more fabric to make the straps for your tote. Choose any width and length you want, but make sure both the straps are of the same length. Mine are approximately 50cm long and 6cm wide (before folding the sides in, 2cm when I'm done folding). Remember that when sewing the straps on to your tote, about 4cm will disappear from each strap (2cm on each side).
Before sewing, make sure all the fabric is tucked in (fold both sides in towards the middle and then fold them over eachother). It'll look something like this:
After you finish the straps, it's time to sew them on to your tote. Put them on the inside and sew a square. If you want it to be even steadier, you can sew a cross in the middle to. I chose to only sew the square (unfortunately my sewing machine decided to act up on me around that time so my seam came out very weird). REMEMBER! Make sure that one strap is only in the front and the other one only in the back so they don't cross over from the front to the back. So many people make that mistake and everything comes out wrong.
Your tote should now be done! If you have any questions, don't hesitate to ask!
Goshhhhhhh, I loved it! thank you so much! I'll try to do my own tote!
Fan vad fint!
Thanks for good idea. I will use it for creating a good bag.
Ser framemot lite nya inlägg!
Vilken underbar idé! Har en exakt likadan tröja som jag använder ca... aldrig. Tack!